PVC chemical resistant gloves

Acid-base environments, hazardous liquids are part of the heavy and light industry. In these environments, in addition to protective clothing and masks, special attention should be paid to the safety of hands. Special PVC chemical resistant gloves will protect your hands from the harmful effects of this chemical environment


Environments that require PVC chemical safety gloves

This includes areas where any abrasive material, liquid, or substance is present. The following is a list of some of the essentials are listed below:


Leather cleansing, exfoliation industry - many substances used in leather cleansing, exfoliation and coloring should not contact with human skin.

Pharmaceuticals - Although simple test gloves are often sufficient, chemical-resistant gloves are a must, especially when working with alcohols, acids, and alkalis.

Cleaning - PVC chemical-resistant gloves should be used, especially when cleaning large areas or using heavy cleaning detergents.

Construction - there are many dangers in this area. Chemical hazards are not minor either.

Any environment in direct contact with dyes, acids, cleaners, abrasives, and other chemical solutions.

Artboard 1.png

The first purpose of using PVC chemical-resistant gloves is safety. But comfort is just as important as safety. The gloves we offer have a mixture of 50% cotton - 50% PVC. This ideal blend will give you the softness, breathability of cotton and at the same time the protection of a very durable PVC material. A particularly soft and tightly knitted cotton wristband will wrap your hand and allow you to work comfortably with gloves.

Safe and comfortable


Be careful when working with gloves

No holes - Be sure to inspect the gloves before using each of them to check whether there is a hole or not. The special bright red surface allows you to easily spot small holes. Also, any discolouration or abrasion on the glossy surface can indicate damage to the integrity.
Cleanliness special attention should be paid to cleanliness as it is treated with special solutions and substances. Gloves should be cleaned after every use; side objects should be removed from the surface. Otherwise, the substance stuck to the surface may react with another substance.
Cutting tools should be used carefully; gloves are highly resistant to chemicals, but the extent of cut-resistance is not high.is not high. It should definitely be protected from moisture and direct sunlight.